Spring is here. Production is ramping up. And your conveyor system is about to tell you everything you missed over the winter.
The components that were borderline in February are going to fail under full load. The splice that looked okay on a visual check won’t hold through a sustained production run. The bearing running a little warm is going to run a lot warmer when it’s working harder.
The time to deal with those weak points is now — before peak season turns a manageable problem into an emergency shutdown.
Stop Problems Before They Stop You
Binkelman’s spring belt inspection service is designed for exactly this moment. Our team identifies splice fatigue, edge damage, and cover wear before it becomes a failure in production. We also offer ultrasound inspections for a deeper look at what’s happening below the surface.
Pair that with a drive system and bearing check, and you’ve addressed the most common sources of unplanned downtime heading into your busiest months.
The Components That Matter Most Right Now
Dodge Defender, Type E & TA2 Bearings — Built for contaminated, high-vibration environments. If you’re seeing heat, noise, or early replacements, your bearing spec or lubrication program may need attention.
Dodge MTA & TA2 Reducers — Shaft-mounted reducers engineered for long service life and simplified maintenance. Reliable performance during high-demand production runs.
Continental ContiTech Conveyor Belting — Premium belting with higher tensile strength and longer cover life for aggregate and the most demanding applications. Built to perform when the tonnage is real.
PPI Pulleys & Idlers — Continuous wing versus standard wing pulleys and mine-duty versus CEMA options engineered to your load requirements, not just what fits. Proper spec prevents shell failures and belt tracking problems.
Flexco Cleaners, Skirting & Belt Tracking Solutions — Carryback isn’t just a mess. It drives up maintenance labor, shortens idler life, and creates safety risks. Flexco belt tracking and containment solutions keep material where it belongs.
Services Ready When You Need Them
Having the right products is only part of it. Binkelman’s service team is available for spring belt inspections, preventative maintenance walks, vulcanization, blade replacements, and installation support at all three locations.
For operations running Elevate or Optify monitoring, this is also a good time to review your data and flag any trends worth addressing before production peaks.
We stock Dodge, Martin, Continental, PPI, Flexco, and Martin components at Bowling Green, Piqua, and Saginaw — so when something needs to happen fast, we’re ready.
Contact your Binkelman rep to schedule a pre-season inspection or talk through what’s most at risk in your system this spring.